Help the development of the site, sharing the article with friends!

So that the lawn has a clean finish, it is often bordered with a lawn edge made of curbs. However, this is not to everyone's taste. There are a few more variants that are listed here.

In a nutshell

  • Curbs are the usual procedure
  • flat stones can be run over with a lawnmower
  • There are alternatives made of different materials
  • including rubber, plastic and wood
  • other stone variants are also possible

lawn edges

The job of lawn borders is to keep the grass from growing and ensure that the lawn has a clean outline. Lawn edging eliminates the tedious work of mowing the lawn that would otherwise be required or removing grass from paths.

curbs

In most cases, stone elements are used, which are dug into the ground around the lawn. Some of the stones need to be concreted in for better durability. Depending on the construction, the curbs can be driven on with the lawn mower and thus enable a smooth cutting edge. Curbs look neat because of their geometric shape, but that is precisely why they are not suitable for every gardener or garden.

Stone alternatives

river stones

A river stone border looks more natural than stone elements. However, you have to prepare the ground thoroughly for this, otherwise the grass will grow through the stones. The topsoil is removed about spade deep. For better weed suppression, place a mulch film in the ditch. Then pour the river stones on it. Depending on the height of the pile, the river pebbles can still be run over with the lawnmower. So that the knives don't become blunt so quickly, there should be enough space between the knife and the stones. The boundary between lawn and beds or paths is not as strict as with curbs and appears more relaxed. River pebbles are available in different sizes as bulk goods in the garden or hardware store.

palisades

Stone palisades are available in pieces at the hardware store, the material is either natural stone or concrete. They are simply dug into the ground like curbstone borders. In places where severe frost threatens, which could move the ground, it is better to embed the stones in concrete. Stone palisades come in different sizes, round or square. They are suitable for different height levels.

plant rings

Plant rings are suitable as lawn edges where additional planting is desired and where the massive stones do not disturb. After digging in, the stone rings can be planted with various plants that can cope with little space. The stone rings are then also well suited as a root barrier. Larger differences in height can be overcome with several rows of plant rings on top of each other.

mowing edges

In contrast to planting rings, the flat mowing edges are much more inconspicuous. After digging in at ground level, they do not interfere with mowing. Still, they make it difficult for grass to grow through. They are available in different colors and sizes in the garden market. Due to the curved lines, they are also suitable for curves and larger arches.

Wooden alternatives

palisades

Similar to stone palisades, there are wooden palisades that are round or square. They are dug into the ground around the lawn and then hammered to the desired height. Pressure-treated wood is particularly durable as a lawn edge.

Notice: If you have individual wishes, you can paint untreated palisades in the color of your choice.

bed borders

Usually, wooden bed edgings consist of several individual palisades that have been nailed together to form a roll board. Some roll boards are processed in such a way that individual palisades are longer and taper to a point. All you have to do is drive them into the ground so that the bed border stands.

mulch

In contrast to other alternatives, bark mulch is not particularly durable, but is particularly suitable as a lawn edge for hedges or natural beds. You can lay the bark mulch like river pebbles. They renew it when it has decomposed.

Notice: Bark mulch is cheaper than other alternatives. You can therefore use it as a temporary solution if the final boundary of the lawn has not yet been determined.

Other materials for lawn edging

rubber

Rubber edgings are flexible and durable. It is important to ensure that the material is weather-resistant, otherwise the edging will gradually lose its good properties. A rubber edge is easy to process. You dig a trench, unroll the rubber band and lift it in. Then just press the earth firmly all around.

plastic

Similar to rubber, plastic is also easy to process. Another advantage is the low weight of the material. However, there are enormous differences in quality, especially with synthetic lawn edges. Cheap plastic quickly becomes brittle and can break. Plug-in systems make it easier to lay the border. It is only put together and then in the ground. With rubber or plastic lawn edges, you have to be more careful when mowing.

metal

The lawn can also be demarcated well with metal. Depending on preference or use, the metal can be buried both at ground level and protruding.

Advantages of processing at ground level:

  • barely visible
  • protected against weather
  • no stumbling block
  • can be driven over with the lawn mower

Advantages of the protruding processing:

  • keeps mulch in beds
  • prevents above-ground overgrowth
  • decorative ornament in the garden

Stainless or galvanized metal is best used. A narrow trench is simply dug for laying. With light soils, even loosening the soil is sufficient. Then use a hammer to hit the metal element into the ground.

frequently asked Questions

How often do lawn edges need to be replaced?

That depends on the respective material. Metal and stone are very durable, they may never need to be replaced. Wood rots over time and rubber can wear down from mowing, just like plastic. Plastic also has the disadvantage that it often becomes unsightly over time.

How often should the lawn edge be cut?

If there is no limit, the lawn must be prevented from growing twice a year by cutting it off.

Is a lawn edge even necessary?

It ensures a clean border, but is not absolutely necessary for the lawn. Without an edge, there is often more work because the lawn grows unhindered in beds or paths.

How stable does the material used have to be?

On the one hand, the material should be able to withstand any type of weather, including frost, and on the other hand, it should not take offense if it comes into contact with the lawnmower blades. In the case of rubber and plastics, it is also important to ensure that they do not release any harmful substances into the soil.

Help the development of the site, sharing the article with friends!

Category:

Garden design